Warranty offered by D&S Autos

We strive to provide our customers with the best cover available because we know peace of mind is priceless. For that reason we have teamed up with Customer Protect, leading provider of quality warranty for cars.

Now you will never feel you are not covered ever again!

Below there is a comprehensive list of all the elements covered, but if you have any questions, feel free to call at any time and we will be happy to give you any further information you need.

Parts covered

The following specifically listed components are included against any Mechanical Breakdown occurring during the Warranty period, provided that the terms and conditions of this Agreement are fully complied with. Any component not listed is specifically excluded.

Engine

The rocker assembly, including hydraulic followers, inlet and exhaust valves (not burnt valves), springs and guides, cylinder head (not cracks, de-coking or porous heads), cylinder head gasket (except skim), push rods, camshaft and followers, timing gears and chains (excluding tensioners and connected electrical devices), oil pump, pistons and rings, cylinder bores (excluding cracked or porous bores), con rods, gudgeon pins and bearings, crankshaft and bearings, inlet manifold, flywheel and ring gear. Timing belts are included provided that the last due change of belt has taken place as specified by the manufacturer's schedule (proof required).

Manual gearbox

Internal gears, synchromesh hubs, selectors, shafts, bearings and bushes and transfer gears (excluding oil leaks).

Automatic gearbox

Internal shafts, gears, clutches, brake bands, valve block, governor, oil pump, bearings and bushes, servo, drive plate and transfer gears (excluding oil leaks).

Torque Converter

Failure of any internal mechanical parts.

Continuously variable transmission CTX

Internal clutches, planetary gears, reduction gears, shafts, variable pulleys, trust link drives, internal seals, bushes and bearings.

Differential

Internal crown wheel and pinion, gears, shafts, bearings and bushes, trust washers and spacers.

Clutch

Centre plate, pressure plate, release bearing, oil contamination (centre plate only) and master and slave cylinders.

Front-wheel drive

Drive shafts, including constant velocity joints, universal joints and couplings (not gaiters).

Wheel bearings

Front and rear wheel bearings.

Propshaft

Universal joints and couplings

Rear-wheel drive

Half shafts, rear-wheel external drive shafts, including constant velocity joints, universal joints and couplings (not gaiters)

Fuel injection system

Throttle body, airflow meter, idle control valve, cold start valve, warm up regulator, overrun cut off valve, throttle potentiometer, fuel accumulator, pressure regulator, map sensor (except injectors and heater plugs).

Engine cooling system

Radiator, oil cooler, heater matrix, water pump, viscous fan coupling, thermostat and thermostat housing.

Steering (including power assisted steering)

Steering rack and pinion (not gaiters), steering box, power steering rack and pump, power steering reservoir and idler box.

Front and rear suspension

Hydrolastic displacers and hydropneumatic spheres, coil springs, upper and lower wishbones and ball and swivel joints.

Brakes

Brake master cylinder, wheel cylinders, restrictor valve, brake calliper seals and servo.

Electrical system

Starter motor and solenoid, including pre¬-engagement mechanism and bendix drive, alternator/diode pack, coil voltage regulator, window and sun roof motors, electric window switches, sunroof switch, central locking motors, heater fan motor, indicator flasher relay, distributor, front and rear windscreen wiper and washer motors, electronic ignition amplifier, thermostatically-controlled radiator fan motor, horn and multi-function stalk switch.

Engine management

Engine electronic control unit (ECU).